SEARCH WHAT YOU WANT
Welcome to Angelor (Jiangsu) Intelligent Electric co.,LTD.
220kV Porcelain insulation outdoor termination
Product Descriptions
● The product uses high-strength porcelain sleeve which has the advantage of high mechanical strength, good stability, no aging, especially suitable for coastal and natural environment harsh areas.
● The product adopts the structure of big and small umbrella skirt, and the experiment has proved that this structure has excellent pollution resistance.
● It has a good sealing performance to prevent flooding, oil leakage and other possible defects.
● Porcelain insulator comes in two sizes. One specification is 1280mm high and 3150mm creepage distance, which is suitable for Ⅲ-level dirty areas. The other specification is 1400mm high and the creepage distance is 3906mm, which is suitable for Ⅳ-level dirty areas.
● The product uses high-strength porcelain sleeve which has the advantage of high mechanical strength, good stability, no aging, especially suitable for coastal and natural environment harsh areas.
● The product adopts the structure of big and small umbrella skirt, and the experiment has proved that this structure has excellent pollution resistance.
● It has a good sealing performance to prevent flooding, oil leakage and other possible defects.
● Porcelain insulator comes in two sizes. One specification is 1280mm high and 3150mm creepage distance, which is suitable for Ⅲ-level dirty areas. The other specification is 1400mm high and the creepage distance is 3906mm, which is suitable for Ⅳ-level dirty areas.
Product introduction: 220kV porcelain sleeve outdoor terminal product introduction.pdf
Structure diagram: 220kV porcelain sleeve outdoor terminal structure diagram.pdf
Product introduction: 220kV porcelain sleeve outdoor terminal product introduction.pdf
Structure diagram: 220kV porcelain sleeve outdoor terminal structure diagram.pdf
Previous: 66~110kV GIS termination
| Technical Specifications | ||
| Area Of Application | ||
| Applicable cable cross-sections: | 240~2500 mm2 | |
| Max.system voltage: | 252 kV | |
| System rated frequency: | 50 Hz | |
| Elevation: | ≤2000 m | |
| Operation temperature; | -55 ℃~45 ℃ | |
| Cable Shield Style | Tape/wire/corrugated Al | |
| Design Data | ||
| Height | 3140±30 mm | |
| Weight(excluding cable) | 550 kg / 1212.54 lbs | |
| Composite insulator | Bending moment resistance | ≥5000 kN |
| Internal withstand pressure | 2.4 MPa | |
| Breakdown pressure | 3.5 MPa | |
| Filling fluid(material) | PIB/Gel | |
| Creepage distance | ≥8300 mm | |
| Permissible horizontal pull of connecting wire | ≥2 kN | |
| Storage temperature | 0 ℃~35 ℃ | |
| Installation temperature | 5 ℃~35 ℃ | |
| Electrical Test | ||
| Electrical Type Test (IEC 62067) | ||
| Heating cycle voltage | 254 kV | |
| Partial discharge test at ambient and elevated temperatures | No detctable discharge exceeding the declared sensitivity (191 kV, 3.8pC) | |
| Lighting impulse voltage | ±1050 kV | |
| Electrical Routine Test (IEC 62067) | ||
| AC withstand voltage (wet,1 min) | 460 kV | |
| Partial discharge test | No detctable discharge exceeding the declared sensitivity (191 kV, 3.8pC) | |
| Technical Specifications | ||
| Area Of Application | ||
| Applicable cable cross-sections: | 240~2500 mm2 | |
| Max.system voltage: | 252 kV | |
| System rated frequency: | 50 Hz | |
| Elevation: | ≤2000 m | |
| Operation temperature; | -55 ℃~45 ℃ | |
| Cable Shield Style | Tape/wire/corrugated Al | |
| Design Data | ||
| Height | 3140±30 mm | |
| Weight(excluding cable) | 550 kg / 1212.54 lbs | |
| Composite insulator | Bending moment resistance | ≥5000 kN |
| Internal withstand pressure | 2.4 MPa | |
| Breakdown pressure | 3.5 MPa | |
| Filling fluid(material) | PIB/Gel | |
| Creepage distance | ≥8300 mm | |
| Permissible horizontal pull of connecting wire | ≥2 kN | |
| Storage temperature | 0 ℃~35 ℃ | |
| Installation temperature | 5 ℃~35 ℃ | |
| Electrical Test | ||
| Electrical Type Test (IEC 62067) | ||
| Heating cycle voltage | 254 kV | |
| Partial discharge test at ambient and elevated temperatures | No detctable discharge exceeding the declared sensitivity (191 kV, 3.8pC) | |
| Lighting impulse voltage | ±1050 kV | |
| Electrical Routine Test (IEC 62067) | ||
| AC withstand voltage (wet,1 min) | 460 kV | |
| Partial discharge test | No detctable discharge exceeding the declared sensitivity (191 kV, 3.8pC) | |
Product Recommendation
66~110kV GIS termination-
66~110kV GIS termination
It is designed to be installed in 66~110kV cable entry housings of gas-insulated switchgear (GIS). Reference to IEC 60840-2011 and IEC 62271-209-2007.
220kV Porcelain insulation outdoor termination-
220kV Porcelain insulation outdoor termination
It is designed for the terminal connection of the 220kV cables and to operate under highly polluted condition. Reference to IEC 62067-2011.
220kV Composite insulation outdoor termination-
220kV Composite insulation outdoor termination
It is designed for the terminal connection of the 220kV cables and to operate under densely populated condition or areas with concentrated electrical equipment. Reference to IEC 62067-2011.
220kV GIS termination-
220kV GIS termination
It is designed to be installed in 66~110kV cable entry housings of gas-insulated switchgear (GIS). Reference to IEC 62067-2011 and IEC 62271-209-2007.
66~110kV Porcelain insulation outdoor termination-
66~110kV Porcelain insulation outdoor termination
It is designed for the terminal connection of the 66~110kV cables and to operate under highly polluted condition. Reference to IEC 60840-2011.
66~110kV Composite insulation outdoor termination-
66~110kV Composite insulation outdoor termination
It is designed for the terminal connection of the 66~110kV cables and to operate under densely populated condition or areas with concentrated electrical equipment. Reference to IEC 60840-2011.
66~110kV Dry flexible outdoor termination-
66~110kV Dry flexible outdoor termination
It is designed for the terminal connection of the 66~110kV cables and can operate under special conditions. Reference to IEC 60840-2011.
66~110kV GIS termination-
66~110kV GIS termination
It is designed to be installed in 66~110kV cable entry housings of gas-insulated switchgear (GIS). Reference to IEC 60840-2011 and IEC 62271-209-2007.
220kV Porcelain insulation outdoor termination-
220kV Porcelain insulation outdoor termination
It is designed for the terminal connection of the 220kV cables and to operate under highly polluted condition. Reference to IEC 62067-2011.
220kV Composite insulation outdoor termination-
220kV Composite insulation outdoor termination
It is designed for the terminal connection of the 220kV cables and to operate under densely populated condition or areas with concentrated electrical equipment. Reference to IEC 62067-2011.
220kV GIS termination-
220kV GIS termination
It is designed to be installed in 66~110kV cable entry housings of gas-insulated switchgear (GIS). Reference to IEC 62067-2011 and IEC 62271-209-2007.
66~110kV Porcelain insulation outdoor termination-
66~110kV Porcelain insulation outdoor termination
It is designed for the terminal connection of the 66~110kV cables and to operate under highly polluted condition. Reference to IEC 60840-2011.
66~110kV Composite insulation outdoor termination-
66~110kV Composite insulation outdoor termination
It is designed for the terminal connection of the 66~110kV cables and to operate under densely populated condition or areas with concentrated electrical equipment. Reference to IEC 60840-2011.
66~110kV Dry flexible outdoor termination-
66~110kV Dry flexible outdoor termination
It is designed for the terminal connection of the 66~110kV cables and can operate under special conditions. Reference to IEC 60840-2011.
66~110kV GIS termination-
66~110kV GIS termination
It is designed to be installed in 66~110kV cable entry housings of gas-insulated switchgear (GIS). Reference to IEC 60840-2011 and IEC 62271-209-2007.
Give us a free quote
Submit this form and our sales representative will contact you soon.
Tel: +86 0519 6822 9970
Adress: 9 Yijing Road, Jintan District, Changzhou City, Jiangsu Province, China.
Copyright © 2024 Angelor (Jiangsu) Intelligent Electric co.,LTD.